 |
|
Circa:
Mid-1900's
Price: $95.00 USD
Description: This is a very clean used automatic spiral, push drill w/ 8 different sized spiral drill bits that store in the handle (1/16-11/64) a full set. All the drill points are in very good to new condition. ..
|
|
|
Circa:
Mid-1900's
Price: $95.00 USD
Description: This is a very clean used 6 inch size machinist's precision square. Both the beam and the blade are precision ground hardened tool steel. It's in very good condition, checks out square within about .0..
|
|
|
Circa:
Mid-1900's
Price: $42.00 USD
Description: This is a good used Master Planer Gauge marked "THE LUFKIN RULE CO. SAGINAW MICH. MADE IN USA NO. 900". It is in very good condition with a working level. It has a few small areas with minor..
|
|
|
Circa:
1930's
Price: $65.00 USD
Description: This is a nice clean very well made, quality pair of cast steel heavy-duty C-Clamps in very good condition. Each is marked "CIN'TI TOOL CO. PAT. U.S.A. 1918469" on one side and "HARGRAVE SUP..
|
|
|
Circa:
1920's-30's
Price: $22.00 USD
Description: This is a nice clean very well made, quality steel toolmaker's deep-reach C-Clamp in very good condition. It is marked "Cincinnati Tool Co. No. 56 Super JR." on one side and "FORGED STEEL HE..
|
|
|
Circa:
Mid-1900's
Price: $75.00 USD
Description: This is a top quality precision dial indicator designed to give the user .015" travel each side of "0" or +-.015" with .0001" accuracy graduations and a Jeweled movement. This one ..
|
|
|
Circa:
1920's-30's
Price: $50.00 USD
Description: This is a rare antique, 2-3" precision outside micrometer marked "ALMOND CO. ASHBURNHAM MASS. U.S.A." on one side, and No. 139-3" on the other side. We know that this company was originally owned by ..
|
|
|
Circa:
1930's-40's
Price: $110.00 USD
Description: This is a rare antique, vernier depth gauge with both the 6" and the 12" vernier scale/rules with the inch graduations on one side of each rule. The narrow rules are specially made for this tool No. ..
|
|
|
Circa:
1930's
Price: $12.00 USD
Description: This is a rare antique, patented light duty 1.5" capacity machinist C-clamp marked "CIN. TOOL CO." on one side of the frame, and "H 570" on the other side. It also has a raised cast lettering patent ..
|
|
|
Circa:
Mid-1900's
Price: $25.00 USD
Description: This is a top quality larger size tap wrench in very good used condition. The T-handle design allows the handle to slide smoothly from one side to the other, and the handle has a spring pushing again..
|
