When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Very good condition.
WIDEA
side rake and tedder
Live axle mounted on
three large bearings
with positive clutch
slidable in a long key.
-TRUSSED ARCH FRAME IS HIGH
AND RIGID. NO BOBBING OF
MAIN FRAME SINCE WEIGHT OF
FRAME ISN'T CARRIED ON TEETH.
EASY LEVER CONTROL
QUICK SHIFT TONGUE WITH
THREE LATERAL POSITIONS.
CONVEX RIMS ON WHEELS EQUIPPED
WITH LARGE TRACTION LUGS.
J
EQUIPPED WITH ADJUSTABLE
CASTER WHEELS.
EXTRA LARGE HORIZONTAL AND
VERTICAL CLEARANCE FOR FREE
MOVEMENT OF HAY.
STRONG,
CLOSELY SPACED
STRIPPER BARS
FRONT WHEEL IS QUICKLY ADJUSTABLE
TO EITHER THE "IN" OR "OUT" curve
are highly e
Easily regula
raking or
with 2 -----------
Twin-face clutch drives roking or tedding
gears. Note HINGE lever arm allowing
reel to raise and the STOP preventing reel
dropping below the set position.
Steel dished head at center of spiral reel.
Bearing mounting or keeper plates an
chored to head. Pressed steel clips CLAMP
teeth on quick-removable tooth bar.
LAN
The potented NEW IDEA quick-shift wheel is
a time saver. No tools, jack or dismantling
are required. Wheel is set "out" for rak-
ing and "in" for turning windrows.
Spring counterbalances reel for easy lift.
Quick movement of reel without bouncing
soves teeth. Note the enclasing of tooth con-
trol and view of extra large, self-aligning
bearing for tooth bar. The sealing cups ro-
tate with the bar-thereby keeping grease
in and grit out.
Tooth control cam with three large rollers
operates in wide cam track. Self-aligning
crank bearings are enclosed. Mountings are
ANCHORED and bolted to steel head.
Position of main caster wheel, as shown.
obove, is just right for roking or tedding.
Not too far out or too far in-never inter-
feres with the hay.
Double curve and coil spring of the teeth
take some elevation when hummock is
struck. If it is not enough, reel quickly rises
and settles back.
Coster wheel is mounted on a sealed hub,
equipped with renewable bronze bushings.
and operated in a spring tushioned forked.
spindle. Mounting is tilted for better trailing.
----------- 4 -----------
here's smoother raking performance at modern tractor speeds-
With a NEW IDEA four-bar side delivery rake
and tedder, the protein-rich leaves are placed
mainly inside the windrow where they are
protected against sun scorch and bleaching,
while the juice-heavy stems are largely on
the outside.
bearings or tooth bars. Clearances between
basket, frame, wheel and main axle are all
unusually generous.
Turning corners or pushing a windrow
against the slope of a hill is done with little
effort. No jamming or crushing at any point.
Hay quality is always helped. Also a favorite
many farmers for raking green beans
and peas as well as hay of all kinds.
with
The high fronted basket strips clean. Little
annoyance is ever experienced from hay
getting inside and wrapping itself around
----------- 4 -----------
SPECIFICATIONS
NEW IDEA
No. 4 four bar side rake and tedder
1. Tread-Wheels in 75%"-wheels out 81%
2. Drive Wheels-44" Diameter, 3" convex rim,
32 traction spuds.
11. Speed ratio-tedding to raking 2 to 1
12. Height to top of front basket angle-38"
13. Lubrication-Equipped with pressure type
3. Caster Wheels-Steel disc-182" diameter,
2½" convex rims
4. Teeth-64 double curved, 3% coils
5. Distance from first to last tooth along reel-
9'8"
6. Number of spring steel round strippers-18
7. One wide fender at left end of reel
8. Bearings-sealed self-aligning type
9. Reel-4 Bar-spiral type
10. Clearance between ground and basket-
8%"
Should hay settle down in a compact mat, the tedding
device built into this machine will lift up the hay,
making it loose for quicker curing.
Three Caster Wheel Attach-
ment is available at extra
cost. Has a stabilizing effect
on the rake when being used
on extremely rough terrain
or irrigated terraces.
fittings
14. Shipping weight with tractor hitch-
1011 lbs.
P
NOTE: Design changes and specifications.
are subject to change without notice.
Better construction,
greater durability and
superior performance.
are assured.
You have BETTER CONTROL over
hay quality with NEW IDEA
equipment
Hay making is always a concentrated rush. A few
hours' delay and the hay may be past its prime.
Just a little rough handling or careless curing
and the hay may lose a large portion of its value.
Take no chances. Plan now to equip yourself with
NEW IDEA hay tools and be ready to meet all
conditions and emergencies.
Horse tongue,
seat iron and se
port shown ab
optional equipr