When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
This is a very nice shape machine.It has (2) 3\" wide 8\" diameter grinding wheels with easily replaceable sanding belts o them.The third wheel on the machine is a 1-1/2\" wide diamond wheel.The Flat disc grinding wheel is missing from the left side of the machine(those can be found on or other suppliers)(also you will need a fluid pump for the liquid cooling system). This all comes with a Westinghouse 1/3 H.P. 115 volt 1725 RPM Motor.This runs great and smooth and quiet.I\'m showing the top lid is easily removed for maintenance on anything. I never did run this,but everything feels tight and smooth spinning.Message me with any questions.I will ship right away.Here are some other tidbits of info.
You would just use your own mini submersible pump and put it in the water tray and connect it to the water lines on the machine.(For the water pumping system)
The motor would mount behind the machine, or under your work-bench, then figure out what length belt(s) you need.
I think these have a flat disc. that would spin onto the threaded shaft,(Left side of machine) for doing flat disc. grinding.