When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hand Tool for setting rivets (Withfix Dies,NonRemovible),for 1/8 Diameter Semi-tubular 7/32 Truss Head Rivets.These rivets are used on mostly pressed steel toy trucks, such as Tonka, Buddy L, Nylint, Structo, Etc. It also works for many other Riveting applications. The tool Measures 6 in. x 4 in. overall in clamped position and Fully extended there is a clearance of 2 3/4 in. from tip to tip.There are 2 1/2 in. from the arch edge, this feature allows you to squeeze rivets farther from your project's edges or within tighter spots, it goes deeper for better results.
It is time to stop using the classic manual little pin set drove with a ball hammer to roll the end of a rivet. The new tool squeezes the rivets to roll them smoothly, without the need for an extra hand or a hammer. It leaves a professional finish, without any trace or scratches on your freshly painted surface.
The tool has the tips built in, so it does not have detachable or interchangeable dies, if you want it with the interchangeabledies system, please go truck at the pictures is not included.The tool may come eitherin color Green or BlackI'm including a handful of rivets 1/8 x 1/8 x 7/32 for yourconvenience.
I also have available the Rivets 1/8 x 1/8 x 7/32 head: Note that this tool is intended to roll up ONLY Soft Steel or Aluminum Rivets. NEVER use it to roll up Stainless Steel rivets or Coper rivets or any other rivets made of hardened metals, If you do so, it may result in a damaged tool.
