When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
***NOT A PROFESSIONAL GRADE PEEKER***Professional grade peekers require special decks and cost hundreds of dollars.This is a simple device that uses mirrors to show you what the card is.3D printed with tough black resin.
I tested this peeker / peeper with JUMBO Bicycle cards.It also works with standard/poker sized cards: Bicycle, Theory 11, and Artisan decks.It should work with most poker size decks.
This is designed to show the dealer in blackjack what the turned down card is to check for a blackjack.The use of this device requires overhead lighting.
This is for home games or for teaching.
Installation:Two black screws are included (see pics).This will require a rectangle hole cut into the table (approx. 1" x 1 9/16" or 26mm x 38mm).It is also recommended that you mark and predrill the screw holes with a 3/32 drill bit.HAND TIGHTEN the screws to prevent warping/cracking from overtightening.
