When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Moon Emblem Badge
Measures aprox 2-9/16" across by aprox 2" Vertically
Several Designs were used over the years of Moon production
There were 2 different versions of mounting on these used in 1921 through 1924 - One had a flat back with no makers mark and used an expanding washer device to mount. The other had a stamped back and used the D.L. Auld flex disc attaching device.
Unsure which version this is, as someone in the past epoxied two mounting pins ( perhaps the best way to install) on the backside
Pin's measure 1-1/4" apart and are a little offset
100 years old so you bet has some wear - patina oxidation and wear to cloisonne, soiling, all which to be expected.
please review photos
Returns accepted in same condition as sent, carefully repackaged, with model, serial, and/or security markings verified same as are seeing backlogs at USPS from time to time. Mainly from Holidays and Storms. We stay in contact with the carriers in order to be aware of expected delays. In those circumstances we will send with another carrier (at no extra expense) if the delivery time shows to be faster. If for some reason you do not want an upgrade to another carrier, UPS for example. Please let us know and we will send by USPS despite the risk for delay.
