When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thislisting is for one (1) new old stock Frosted & Floral Etched PinkRuffled Top glass light shade. The newold stock frosted and etched glass shade displays well and is in very good unused conditionwith little, if any, shelf wear. Theremay small nicks on the cut fitter and some light surface scratches, none ofwhich adversely affect the display or use of this quality tulip-shaped glassshade. Highlighted with an etched floralmotif and accented with a pink (or rose or blush) colored ruffled rim, the handblown shade measures about 4-3/8” tall and5-1/4” wide with a diameter of about 5” and a 2” lip fitter (2.0” OD, 1.6”ID). The clean and bright glass shadeweighs about 8 ounces. More than 10(ten) of these quality glass shades are available at the time of listing withthe measurements shown being representative of the lot.
Ruby Tint Art Nouveau Etched Fixture Shade, Optic pattern glass with raised decoration and acid etched finish. Ground and polished edges
We have purchased hundreds of antique andvintage glass lamp and light shades from several estates and dealers in Eastern& Central Pennsylvania. Please visit our store at The Other Man's Store to view additional glass light shades.
How are glass shades measured?
Glass shades are usually measured by three simpledimensions: fitter size, height, and width. The fitter size is the part thatmatters most when matching a shade to your fixture. It refers to the outsidediameter of the small lip at the top of the shade that fits into the shadeholder.
To measure height, start at the base of the fitter lip andmeasure down to the bottom of the shade. For width, measure across the widest partof the shade. Depending on the style, this may be at the top, center, orbottom.
How do I determine the correct size glass shade for mylight fixture?
The easiest way to find the right replacement shade is tomeasure the inside diameter of the shade holder on your light fixture. Matchthat measurement to the fitter size of the glass shade. Common shade holdersizes include 2¼", 3¼", 4", 6", 10", and 12".
