When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Please note you are only buying the custom hat, mustache, and bow tie accessory. The dispenser is shown just so you can visualize how it looks with your own dispenser on it. No Pez dispenser included. The last photo of 4 show the other ones I have up for sale.
This was inspired by the hard to find Ringmaster Pez.
This was not manufactured or endorsed by Pez. This is a custom creation that is compatible with the vintage Pez Pal with holes in head dispenser only. It will also work with the vintage valentines boy with feet too. It’s much cheaper to buy these days too. It has 1 peg in the back hole that is glued. You just have to break the hair free. It comes off relatively easy. The front hole is open for the hat to slide into.
Keep in mind the Pez Pals that were made were slightly different in size from each other. I designed this to be as universal as possible with the different sizes. So some fit a bit tighter/looser than others. The bow will hold on with the pegs, but on 1 model I tested if you tilt the head with it on, it may come loose.
If a part doesn’t hold on well, you can use a bit of tacky to lock it into place. Most pals should hold the pieces on.
I have the words repro engraved on the inside of the head and the bow tie.
The hat has a peg that slides through the front hole of the head. It doesn’t go in the back hole. If for some reason you can’t slide it in or the peg breaks, the hat will still lay onto the head nicely. Even with the peg, if you tilt the head upside down it will slide off. I didn’t want to make it too snug in order to fit universally.
It is 3-D printed and made of a hard plastic.
Check out my many other 3d printed custom designs!
I also have other designs that fit onto the vintage Pez Pals Pez. Check out my listings.
Shipping is a flat rate of $7.00 for one, and no additional cost for each additional 3d printed custom creation you buy.
Please check out my other Pez dispensers for sale to save on shipping.
