Triple Graded Card/Booster Pack Premium Wall Mounted Display Case (also stands) For Sale

Triple Graded Card/Long Booster Pack Wall Display/Standing Display (can do both!)

• Premium Display Case made fromcrystal clear,thick,acid-free,UV resistantAcrylic

• Protectsyour displayed itemagainst UV, dust, dirt, scratches, knocks, creasing, general wear and tear

• Comesunassembled, wrapped and boxed along with a pack of all the screws and fixings required for either a Standing Display or a Wall Display -you can use your display case interchangeably between these 2 stylesas shown in the listing pictures. Shipped via Royal Mail Tracked, ensuring it reaches you promptly and in perfect condition.Please take care not to scratch the acrylic when opening if using a sharp object

• Simply unwrap and assemble with your packs inside,following the directions below. Assembly time is estimated to be roughly4-5minutes for a Standing Displayand roughly10-15 minutes for a Wall Displaydepending on which tools are available to you

• Fitsall types of Graded Card slabof any grading company, including PSA, Beckett/BGS, CGC (all as shown), all UK companies, etc.

• Also fits all types of Long Booster Packs.Although this has been specially designed for long-crimp WOTC Pokémonpacks (e.g. Base Set, Fossil, Jungle), it will also fit Japanese packs (e.g. Shiny Star V, VSTAR Universe, Tag All Stars) and packs from any other Trading Card Game.

• The acrylic is easily cleaned by wiping with a microfibre cloth or any damp cloth.

• Discounts are available for purchasing higher quantities and are as follows:

  -1 Display Case - Price as listed

  -2 Display Cases - 5% off

  -3 Display Cases - 8% off

  -4+ Display Cases - 10% off

STANDING ASSEMBLY:

1. Please refer to listing picture 4 as a guide to how the acrylic pieces fit together with the silver screws and small rubber ring protectors. The thinner acrylic plates go either side of the thick central piece, with the two small rubber rings in contact with the outer plates to protect the surfaces from the silver screw fixings.
2. It is easiest if you lay the first thin plate down with the silver screws sticking up (remember to place the rubber rings between the silver screw and the plate).
3. Then, place your thick central piece on top.
4. Place your slabs/packs inside - remember to check they are facing the correct way (in this particular position, face down would be the front of the display)
5. Place the second plate on top to seal the display.
6. Screw the silver back fixings onto the silver screw (remembering to place the other rubber rings between the second plate and the fixing).
7. Your standing display is complete!

WALL ASSEMBLY

1. Wall assembly is somewhat the same as before, but a little more complicated and requires some additional tools (e.g. a power drill). This time you are attaching the back silver fixings into your wall instead of onto the silver screws. You are provided with 4 wall plugs and 4 black self-tapping screws.
2. To mark where the holes should be drilled, take a pencil and the thick middle acrylic piece - line the piece up in the desired spot on your wall, then mark the holes with your pencil. Having a Spirit Gauge resting on top of the thick acrylic piece whilst you mark the holes will ensure your display is level. Ask a friend or family member to assist you if needed.
3. Use a 5mm drill bit with your desired tool to drill the holes you have just marked.
4. Knock the wall plugs in until they are flat. A rubber mallet would be best for this so you don\'t damage your wall. Be sure not to bend or damage your wall plugs whilst you are knocking them in.
5. There are two holes in the silver back fixings - one large and one small - the black screws fit through the larger hole and poke out of the smaller hole so you can attach the silver fixings to the wall. Place the black screws inside within the silver fixings and use a phillips head screwdriver to attach the silver fixings onto your wall (by screwing the black screws into the wall plugs). Tip: it helps to leave these slightly loose to allow yourself some leeway when attaching the acrylic display.
6. Construct your acrylic display as before, ensuring you have placed the protective rubber rings on both sides of the acrylic plates.
7. Screw the silver screws into the silver fixings, tightening a little at a time until the display is properly aligned and nothing is loose. Then, screw them all the way in.
8. You have finished installing your wall display!

Shipping info: Depending on quantity purchased, your items may be senteitheras a small or medium parcel - whichever makes sense for the weight. All orders will go out via a 1-2 day service (Royal Mail Tracked 24), ensuring your Acrylic Display(s) reaches you quickly and in perfect condition.
Please note: none of the displayed TCG/gaming items are included in this listing. They are for demonstration purposes only and this listing is for only the Acrylic Standing/Wall Display.Thank you and happy collecting!