Upower Dual Exhaust Tip 2.5 Inch Inlet 3" Outlet 9.5" Length Stainless 304 NEW For Sale

• Store
• New Arrivals
• Add to Favorite
• View response
• Contact

Upower Dual Exhaust Tip 2.5 Inch Inlet 3" Outlet 9.5" Length Stainless 304 NEWDescription Color Sliver Is Discontinued By Manufacturer No Product Dimensions 9.5"L x 2.5"W Material Stainless Steel Manufacturer Part Number 179875 Item Weight 1.01 pounds Installation Type Weld-On Exterior Chromed Special Features Inlet: 2.5"/ Outlet: 3"/ Length: 9.5" Finish Type Polished

• 【2.5"X3"X9.5" Exhaust Tip】: 2.5 inch Inlet; 2x3 inch Outlet ; 9.5 inch Overall Length exhaust pipe
• 【Weld-On Exhaust Tip】: Weld On - Double Wall Slant Angle Cut - Rolled Edge Tail pipe Tip for Truck
• 【Stainless Steel Exhaust Tip】: High Quality Mirror Polished T304 Stainless steel. Sturdy and Anti-corrosive,never Rusty.- Angled Cut - Rolled Edge design
• 【Wide Application】: Universal fits 2.5" INLET diesel trucks car pickup exhaust tail pipe. Please check all the dimensions of exhaust tip before purchasing in case of installation interference
• 【Upower Exhaust Tip】: No instruction is included. Professional installation is highly recommended

Product Description

​How to Install the exhaust Tip?

Note: Please Measure the size of your Tail Pipe Before purchase, the outlet size of the tailpipe should match the inlet size of this Exhaust Tip.

Exhaust Tip Description:

• Features corrosion resistance to alkali solution and most organic and inorganic acids.
• Repeated polishing processing, bright as a mirror, highlighting the noble quality.

Exhaust Tip Features:

• Inlet Diameter: 2.5"
• Outlet Diameter: 3"
• Overall Length: 9.5"
• Installation: Weld On
• Style: Double Wall Slant - Angled Cut - Rolled Edge
• Material: 304 Stainless steel
• Features corrosion resistance to alkali solution and most organic and inorganic acids.
• Repeated polishing processing, bright as a mirror, highlighting the noble quality.
• 1*Stainless Steel Dual Exhaust Tips

Step 1: Cleaning the Tailpipe

• Clean off the tailpipe and exhaust tip with penetrating oil and a shop rag.
• Make sure your tailpipe is at room temperature, and do not clean the surface of the tailpipe after the car just went out

Step 2: Sliding the Tip On

Try to slide the tip onto the exhaust pipe. You will probably meet some resistance, so use automotive grease to lubricate the pieces if necessary. Cover the end of the exhaust tip with a towel and tap it into a place with a rubber mallet.

Step 3: Weld the Tip

weld a joint between the edges of the tailpipe and the exhaust tip to finish the installation.