When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
HIGH QUALITY 11 1/4" OVERALL - 6 3/8" CONVEX GRIND BLADE
THE KNIFE, WHETSTONE, FIRE STARTER KIT & PREMIUM HORIZONTAL SHEATH
IN THE PHOTOS ARE THE EXACT ONES YOU WILL RECEIVE
D2 Tool Steelis a high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium-rich alloy carofferes in the steel. D2 provides an effective combination of wear resistance and toughness. D2 holds an edge very well. When needed, use a Diamond Wet Stone or better to re-sharpen the blade at 20-degrees. When doneusingthe knife, wash it is soap and water, dry completely, coat in gun oil and store away from the sheath. Leather pulls moisture out of the air and can rust the blade if stored improperly.
Vacuum Hardened to 57-59HRC - SHARP!
5 7/8" Cutting Edges1 3/4" Blade Width
90-Degree Spine
4 7/8" Long Rounded Comfort-Grip Handle3/16" Thick at the SpineBrass TubePinsBrass Lanyard Hole90-Degree SpineKnife Weight: 13 Ounces
IF THE KNIFE IS LISTED AS "NEW" IT WILL COME WITH A KNIFE REGISTRATION CARD TO SIGN UP FOR OUR REPLACEMENT GUARANTEE PROGRAM, IF IT IS LISTED AS "USED" THERE IS NO REPLACEMENT GUARANTEE PROGRAM AND THE KNIFE IS SOLD AS-IS.
The knife comes with the high-quality cowhide leather sheath in the photos.
If the sheath has attached straps and a loop it is for a fire starter rod (not included).
If the sheath has attached straps they are for concealed and horizontal carry options.
KNIFE CARE AND CLEANING:When needed, use a Diamond Wet Stone or better to re-sharpen the blade at 20-degrees. When doneusingthe knife, wash it in soap and water, dry completely, coat in gun oil and store away from the sheath. Leather pulls moisture out of the air and can rust the blade if stored improperly.
All our knives and axes are 100% handmade. We do not use any CNC machining,water-jet, or pre-cut blanks to make our items.Eachknife or Axe will be 100% unique and may have some handmadecharacteristics thatmake them unique.
IPAK® IS A UNITED STATES REGISTERED TRADEMARK CLASS 8 - NO 5,816,941
CFK® IS A UNITED STATES REGISTERED TRADEMARK CLASS 8 - NO 5,674,541
