When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The current versioneliminates the semi-invisible marking on the carbon fiber base, addingversatility to the base.
Notes before purchase
This product is cut from Shaptonpro (kuromaku) Whetstone , with grit #120 .forHapstone, Apex Edge Pro, Tsprof ,etc.
Stone Material
Shapton pro (kuromaku)
Stone Length
150mm(5.9inch)
Stone Wide
15~16mm(0.59~0.63inch)
Stone Thickness
Approximately 5.4mm(0.21inch)
Base Material
Carbon Fibre
Base Length
160mm(6.3inch)
Overall Thickness
Weight
Approximately 48g(1.69OZ)
This product is not allowedto be returned. This product is a consumable of fixed angle grinder. Pleaseunderstand the fixed angle grinder in detail before purchasing, and measureyour own fixed angle grinder fixture to ensure successful installation.
On the side of the whetstone, the labels may be different for different batches of products, for example, some products may be spray labels, some may be stamp labels, and the label order may also be different. Rest assured, they are the same product, both cut and machined with Japanese whetstones. If you purchase this product, it means that you do not mind that the form of the label may be different, thank you for your understanding.
Due to the production batch, there may be laser-printed marks on the carbon fiber plate on the back of the whetstone, and some may not. The current new version is unmarked, which provides the versatility of a carbon fiber baseplate.
1.The size of this stone is Approximately 150 ×15~16 × 5.4mm. The base is a 160mm long high-strength carbon fiber base withinclined planes at both ends. It is suitable for a variety of fixed anglesharpeners on the market. There is a slight error in the thickness of thegrinding stone. If there is a slight unevenness, please use diamond plate orcorrection stone to polish it with water.
2.Attention in use: the grinding stone made ofmagnesium chloride cement cannot be soaked in water for a long time, otherwiseit may lead to looseness of the grinding stone. Direct grinding after waterspraying can prolong the service life of grinding stone, improve cutting,reduce scratches and improve grinding feel.
3.#120 /220/320grinding stone can be used asraw grinding or rough grinding, with the largest consumption, # 1000-2000 isthe middle grit and #5000/8000/12000 is used as a starting point, Theconsumption is small and one can be used for a long time. #30000as the most delicate grindstone of shapton at present, 30000 has low productionand sales volume and high price. It is one of the models in pursuit of extremesharpness.
4.#120/220/320 because the grit number is lowand the abrasive particles are large, the hand feel is obviously different from#1000 or more; The higher the mesh number, the stronger the sense ofsmoothness.
5.The width of this set of grindstone is 15 ~16mm, which is more suitable for grinding the s-edge or the edge with greatercurvature. If you want to grind the straight edge, please choose the grindstonewith the width of 24 ~ 25mm.
6.The base is made of Japanese Toray 3K carbonfiber board, which has high strength, is not easy to deform and can be reused.When the grinding stone is used up, the grinding stone can be shoveled downwith a shovel, sprayed with glue remover to remove the surface, polished thesurface of the base with sandpaper, and a new grinding stone strip can bepasted again.
7.Store in room temperature and ventilatedenvironment, avoid direct sunlight and high temperature.
