|
|
Circa:
1930-50's
Price: $40.00 USD
Description: This is a very nice used combination sharpening stone, marked "ACME COMBINATION OIL STONE MADE IN U.S.A." on the wood box label. Overall a very nice sharpening stone, with a good box jointed..
|
|
|
Circa:
1930-50's
Price: $42.00 USD
Description: This is a very nice used combination sharpening stone, marked "ACME COMBINATION OIL STONE MADE IN U.S.A." on the wood box label. Overall a very nice sharpening stone, with a good box jointed..
|
|
|
Circa:
Mid-1900's
Price: $14.00 USD
Description: This a very clean used spring divider that is marked "THE LUFKIN RULE CO. SAGINAW MICH. MADE IN U.S.A.". It measures 4" long from the center line of the pivot joint to the tips. It is i..
|
|
|
Circa:
Mid-1900's
Price: $16.00 USD
Description: This a very clean used inside caliper that is marked "THE LUFKIN RULE CO. SAGINAW MICH. MADE IN U.S.A.". It measures 8" long from the center line of the pivot joint to the tips. It is i..
|
|
|
Circa:
late 1800's-1930's
Price: $22.00 USD
Description: This is a U.S.A. made 6" monkey wrench marked "P.S. & W. CO. CLEVELAND O. U.S.A." on the solid jaw. It's in good condition, not rusty, with a good solid wood handle and a straight bar. The jaws have s..
|
|
|
Circa:
early 1900's-40's
Price: $35.00 USD
Description: This is a nice 13.7" long ratchet brace with rosewood handles, and is a 10" swing. The swing handle is the split type with the pewter rings to hold it together. In good working condition, clean with ..
|
|
|
Circa:
early 1900's-40's
Price: $45.00 USD
Description: This is a top quality oil stone sharpening stone that measures 1 3/4" x 5.75" long. The stone is brown color, not cracked, a few edge dings, designed it appears to be used on one side only. ..
|
|
|
Circa:
early 1900's
Price: $35.00 USD
Description: This is a good old 12" long monkey wrench marked "BILLINGS TRADE MARK COESquot;. The handle is the solid steel type in good condition with wear and a small dings, but straight, not bent. The..
|
|
|
Circa:
Late 1800's-Early 1900's
Price: $65.00 USD
Description: This is a rare solid brass cylinder, or machine oiler! It is marked "DETROIT LUBRICATOR CO. DETROIT U.S.A." on the largest part of the bulb shaped form of the exterior body. This oiler is 4.5" tall in..
|
|
|
Circa:
Mid-1900's-70's
Price: $75.00 USD
Description: This is a very nice, used 1/2" capacity ball bearing super chuck marked "JACOBS U.S.A. 14N 3 JT SCV. KIT #30345 1/8-1/2 IN 0-13mm CAP." near the jaws, and also marked "JACABS BALL BEARING SUPER CHUCK"..
|